Camlok Horizontal Plate Clamp THK 750 - 9000kg
€488.59incl. VAT
Incl. VAT. Shipping calculated at checkout.
- Reversed tooth jaw. Safety feature for thin sheets that tend to deflect, sag or flex.
- Based on the CH range. Shares the basic design features of the CH horizontal plate clamps.
- 750 kg to 9000 kg per pair. Jaw capacity up to 60 mm, max. 30° from the vertical.
- Plate hardness limit. Suited to thin plate with a surface hardness below 300 Brinell/32 Rockwell C.
Capacity:
750 kg
Accepted payment methods
Please enter correct zip code
shipping
Camlok Horizontal Plate Clamp
The THK horizontal plate clamps share the same basic design features as the CH range of clamps but have a reversed tooth jaw design. This safety feature is designed for use with thin sheets which may have a tendency to deflect or sag or flex.
Suited to a thin plate with a surface hardness less than 300 Brinell/32 Rockwell C.
Specifications:
- Capacity (WLL, per pair): 750 - 9000 kg (depending on model)
- Jaw capacity: 0 - 60 mm (depending on model)
- Weight: 3 - 35 kg
- The angle from the vertical must not exceed 30°
- Shackle NOT included
| Model | WLL per pair (min. - max. load) | Jaw Capacity | Weight |
|---|---|---|---|
| THK750 | 40 - 750 kg | 0 - 25 mm | 3 kg |
| THK1500 | 75 - 1500 kg | 0 - 35 mm | 6 kg |
| THK3000 | 150 - 3000 kg | 0 - 35 mm | 11 kg |
| THK4500 | 250 - 4500 kg | 0 - 45 mm | 16 kg |
| THK6000 | 300 - 6000 kg | 0 - 60 mm | 23 kg |
| THK9000 | 450 - 9000 kg | 0 - 60 mm | 35 kg |