Classic Lodestar Large Frame - Gearing
| KEY # | PART # | DESCRIPTION | QTY |
| 627-112 | 35066 | Suspension Adapter Anchor | 2 |
| 627-115 | 24008B | Motor Housing | 1 |
| 627-117 | 935791 | Suspension Adapter Nut | 2 |
| 627-118 | 10001507 | Chain Guide | 2 |
| 627-302 | 35421 | Lift Wheel | 1 |
| 627-307 | 82002 | Lift Wheel Bearing (Gear End) | 1 |
| 627-308 | 83669 | Lift Wheel Bearing (Motor End) | 1 |
| 627-740 | 987210 | Loose End Screw | 1 |
| 627-741 | 945851 | Loose End Screw Lockwasher | 1 |
| 627-742 | 954807 | Loose End Screw Washer | 1 |
| 627-743 | 35367 | Loose End Link | 1 |
| 627-750 | 85949 | Load Chain | varies |
| 627-833 | 35418 | Dead End Block | 1 |
| 627-834 | 82314 | Dead End Pin (Model R & RR) | 1 |
| 627-835 | 988330 | Dead End Pin Cotter Pin (Model R & RR) | 1 |
| 627-836 | 987877 | Dead End Pin Washer (Model R & RR) | 1 |
| 627-837 | 36764B | Contact Block (Model R & RR) | 1 |
| 627-1030 | 35291 | Dead End Block Hole Plug (Model J, L & LL) | 1 |
INSPECTION
To assure safe operation, extra long life and top performance, a regular inspection procedure must be initiated to replace damaged parts.
MAINTENANCE
- Load Chain: A small amount of lubricant will hugely increase the life of the load chain. Keep it clean and lubricate at regular intervals with Lubriplate, Bar and Chain Oil 10-R. Normally, weekly lubrication and cleaning are satisfactory, but under hot and dirty conditions, it may be necessary to clean the chain at least once a day and lubricate it several times between cleanings.
- Chain Guides, Liftwheel: When the hoist is disassembled for inspection and/or repair, the chain guides and liftwheel must be lubricated with Lubriplate, Bar and Chain Oil 10-R (Fiske Bros. Refining Co.) prior to reassembly. Apply sufficient lubricant to obtain run-off and full coverage.
- Bearings: All bearings and bushings except the lower hook thrust bearing are pre-lubricated and require no lubrication.