Classic Lodestar Large Frame - Gearing

Classic Lodestar Hoist Parts - Large Frame Gearing
KEY # PART # DESCRIPTION QTY
627-112 35066 Suspension Adapter Anchor 2
627-115 24008B Motor Housing 1
627-117 935791 Suspension Adapter Nut 2
627-118 10001507 Chain Guide 2
627-302 35421 Lift Wheel 1
627-307 82002 Lift Wheel Bearing (Gear End) 1
627-308 83669 Lift Wheel Bearing (Motor End) 1
627-740 987210 Loose End Screw 1
627-741 945851 Loose End Screw Lockwasher 1
627-742 954807 Loose End Screw Washer 1
627-743 35367 Loose End Link 1
627-750 85949 Load Chain varies
627-833 35418 Dead End Block 1
627-834 82314 Dead End Pin (Model R & RR) 1
627-835 988330 Dead End Pin Cotter Pin (Model R & RR) 1
627-836 987877 Dead End Pin Washer (Model R & RR) 1
627-837 36764B Contact Block (Model R & RR) 1
627-1030 35291 Dead End Block Hole Plug (Model J, L & LL) 1

INSPECTION

To assure safe operation, extra long life and top performance, a regular inspection procedure must be initiated to replace damaged parts.

MAINTENANCE

  • Load Chain: A small amount of lubricant will hugely increase the life of the load chain. Keep it clean and lubricate at regular intervals with Lubriplate, Bar and Chain Oil 10-R. Normally, weekly lubrication and cleaning are satisfactory, but under hot and dirty conditions, it may be necessary to clean the chain at least once a day and lubricate it several times between cleanings. 
  • Chain Guides, Liftwheel: When the hoist is disassembled for inspection and/or repair, the chain guides and liftwheel must be lubricated with Lubriplate, Bar and Chain Oil 10-R (Fiske Bros. Refining Co.) prior to reassembly. Apply sufficient lubricant to obtain run-off and full coverage.
  • Bearings: All bearings and bushings except the lower hook thrust bearing are pre-lubricated and require no lubrication.
Go Back to
Full Classic Lodestar Hoist Configuration